SelectAlloy 317L

Stainless Steel / Flux Cored / Gas Shielded


Features

  • Low C, < 0.04 wt%, minimizes carbide precipitation (sensitization) which makes the weld metal more resistant to intergranular corrosion.
  • The addition of Mo improves resistance to pitting and crevice corrosion compared to type 308 stainless steel with increased resistance compared to type 316 due to the nominal ~1 % increase (Mo).
  • Produces a finely rippled, equal legged, and well washed bead geometry in both 100% CO₂ or 75-80% Ar/balance CO₂ shielding gas
  • Smooth arc transfer and self-releasing slag that peels freely to ensure that clean up time is minimized.
  • Applications for this alloy type include welding components of similar composition or multilayer classing applications in severely corrosive environments, where crevice and pitting corrosion are of concern.

Standard Diameters

in (mm)
  • 0.035 (0.9)
  • 0.045 (1.2)
  • 1/16 (1.6)

Welding Positions

Flat and Horizontal

Shielding Gas

  • 75-80% Ar + Balance CO₂
  • 100% CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.22
    • E317LT0-1
    • E317LT0-4
  • AWS A5.22
    • E317LT0-1
    • E317LT0-4
  • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas Bi C Cr Cu Mn Mo Ni P S Si WRC-1992 Ferrite
    100% CO₂ >0.002 0.03 19.40 0.17 1.00 3.15 11.90 0.02 0.01 0.60 12
    75% Ar/25% CO₂ >0.002 0.03 19.50 0.18 1.15 3.16 12.30 0.02 0.01 0.70 12
    Bismuth is not intentionally added and is not known to be at levels greater than 0.002 wt%

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.