SelectAlloy 316L-AP CRYO

Stainless Steel / Flux Cored / Gas Shielded

Resources

Features

  • Specially formulated to produce good weld metal toughness via strict weld metal chemical composition control.
  • Low C, < 0.04 wt%, minimizes carbide precipitation (sensitization) which makes the weld metal more resistant to intergranular corrosion.
  • The addition of Mo improves resistance to pitting and crevice corrosion compared to type 308 stainless steel.
  • Designed for welding in all positions where well washed beads can be achieved with minimal weaving in 75-80% Ar/balance CO₂ shielding gas.
  • Smooth arc transfer produces minimal spatter.
  • Applications for this alloy type include fabrication or repair of cryogenic components of similar composition that require weld metal toughness to maintained at temperatures of -320ºF (-196ºC).

Standard Diameters

in (mm)
  • 0.045 (1.2)
  • 1/16 (1.6)

Welding Positions

All Positions

Shielding Gas

  • 75-80% Ar + Balance CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.22
    • E316LT1-4
  • AWS A5.22
    • E316LT1-4
    • E316LT1-4J
    • Approvals
    Agency Approval Shielding Gas Diameter(s)
    in (mm)
    DNV VL 316 L M21 (75% Ar/25% CO₂) 0.035 (0.9) – 1/16 (1.6)
    TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cr Cu Mn Mo Ni P S Si WRC-1992 Ferrite
    75% Ar/25% CO₂ 0.03 17.80 0.15 0.80 2.20 12.90 0.02 0.01 0.50 2
    Bismuth is not intentionally added and is not known to be at levels greater than 0.002 wt%
    Typical Mechanical Properties
    Shielding Gas Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    -320 °F ft⋅lb (-196 °C J)
    75%Ar / 25%CO2 82 (566) 58 (400) 35 As-Welded – 35
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Shielding Gas Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 215 (5.5) 130 23 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 260 (6.6) 145 24.5 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 310 (7.9) 160 26 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 420 (10.7) 180 27.5 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 450 (11.4) 200 29 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 135 (3.4) 160 23 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 190 (4.8) 195 24.5 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 225 (5.7) 210 26 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 255 (6.5) 225 27.5 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 290 (7.4) 245 29 3/4 – 1 (19 – 25)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.