SelectAlloy 316H-AP

Stainless Steel / Flux Cored / Gas Shielded


Features

  • The added C provides higher tensile and creep strength at elevated temperatures.
  • The addition of Mo improves resistance to pitting and crevice corrosion compared to type 308 stainless steel.
  • Designed for welding in all positions where well washed beads can be achieved with minimal weaving in both 100% CO₂ or 75-80% Ar/balance CO₂ shielding gas
  • Applications for this alloy are in the welding of type 316H components for the pulp and paper industry, chemical and textile processing equipment, furnace parts and in parts exposed to marine environments.

Standard Diameters

in (mm)
  • 0.035 (0.9)
  • 0.045 (1.2)
  • 1/16 (1.6)

Welding Positions

All Positions

Shielding Gas

  • 75-80% Ar + Balance CO₂
  • 100% CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.22
    • E316HT1-1
    • E316HT1-4
    • E316T1-1
    • E316T1-4
  • AWS A5.22
    • E316HT1-1
    • E316HT1-4
    • E316T1-1
    • E316T1-4
  • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cr Cu Mn Mo Ni P S Si WRC-1992 Ferrite
    100% CO₂ 0.06 18.50 0.19 1.08 2.55 12.30 0.02 0.01 0.81 3
    75% Ar/25% CO₂ 0.06 18.60 0.17 1.14 2.59 12.40 0.02 0.01 0.87 4
    Bismuth is not intentionally added and is not known to be at levels greater than 0.002 wt%

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.