Select ECF2

Low Alloy / Submerged Arc / Flux Shielded

Resources

Features

  • Intended for single and multiple pass welding of high strength low alloy (HSLA) and micro-alloyed steels where a combination of 90 ksi ultimate strength and good notch toughness are required.
  • Higher deposition rates than solid wire when run at the same current level
  • Exhibits a broader and shallower bead profile than when using solid wire, reducing the tendency for burn through
  • Capable of running directly over root passes with proper procedure – eliminating requirement for a hot pass
  • Easy slag removal – reduces post weld cleanup time
  • Arcflux BF-10MW is the recommended flux, although other fluxes with high basicity can be used in place of this.

Standard Diameters

in (mm)
  • 5/64 (2.0)
  • 3/32 (2.4)
  • 1/8 (3.2)
  • 5/32 (4.0)

Welding Positions

Flat and Horizontal

Shielding

  • Arcflux BF-10MW

    Polarity

    Direct Current Electrode Positive (DCEP)

    Conformances

  • ASME SFA 5.23
    • F9A5-ECF2-F2 (ARCFLUX BF-10 MW)
    • F9P5-ECF2-F2 (ARCFLUX BF-10 MW)
  • AWS A5.23
    • F9A5-ECF2-F2 (ARCFLUX BF-10 MW)
    • F9P5-ECF2-F2 (ARCFLUX BF-10 MW)
    • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Flux C Cu Mn Mo Ni P S Si
    ARCFLUX BF-10 MW 0.11 0.07 1.91 0.53 0.50 0.015 0.014 0.26
    Typical Mechanical Properties
    Flux Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    -20 °F ft⋅lb (-29 °C J)    		 Charpy V-Notch
    -50 °F ft⋅lb (-46 °C J)
    ARCFLUX BF-10 MW 108 (745) 96 (662) 24 As-Welded – 115 (156) 90 (122)
    ARCFLUX BF-10 MW 102 (703) 90 (621) 26 PWHT 1150°F for 1 hr 74 (100) 49 (66)
    ARCFLUX BF-10 MW 99 (683) 87 (600) 25 PWHT 1150°F for 8 hrs 67 (91) 33 (45)
    ARCFLUX BF-10 MW 96 (662) 85 (586) 25 PWHT 1150°F for 20 hrs 109 (148) 72 (98)
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Flux Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 100 (2.5) 200 27 3/4 – 1 (19 – 25)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 180 (4.6) 300 27.5 3/4 – 1 (19 – 25)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 260 (6.6) 400 28 3/4 – 1 (19 – 25)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 60 (1.5) 250 27.5 1 – 1 1/4 (25 – 32)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 85 (2.2) 350 28 1 – 1 1/4 (25 – 32)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 130 (3.3) 450 29 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 55 (1.4) 350 28.5 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 75 (1.9) 450 29.5 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 100 (2.5) 550 30.5 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 50 (1.3) 450 30 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 65 (1.7) 550 31 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 80 (2.0) 650 32 1 – 1 1/4 (25 – 32)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.