Select 80C-Ni1

Low Alloy / Metal Cored / Gas Shielded

Resources

Features

  • Intended for welding horizontal and flat fillets and flat groove welds.
  • Can be used with shielding gas mixtures of 75-95% Ar/balance CO₂, and 95-98% Ar/balance O₂.
  • A good selection for welding steels such as ASTM A203-Grade E, A302, A575, and A633.
  • Typical applications would be fabrication of earthmoving machinery parts and buckets, mining machinery, and fine-grained structural steels.

Standard Diameters

in (mm)
  • 0.035 (0.9)
  • 0.045 (1.2)
  • 0.052 (1.3)
  • 1/16 (1.6)

Welding Positions

Flat and Horizontal

Shielding

  • 75-95%Ar/Balance CO₂
  • 95-98%Ar/Balance O₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.28
    • E80C-Ni1-H4
  • AWS A5.28
    • E80C-Ni1-H4
  • AWS A5.36
    • E80T15-M20A5-Ni1-H4
    • E80T15-M22A5-Ni1-H4
  • AWS D1.8
    • 1/16 in (1.6 mm), (90% Ar/10% CO₂)
    • Approvals
    Agency Approval Shielding Gas Diameter(s)
    in (mm)
    CWB E550T15-GA4-Ni1-H4 G (Gas Mixture*) 0.035 (0.9) – 1/16 (1.6)
    CWB E550T15-M20A4-Ni1-H4 M20 (85% Ar/15% CO₂) 0.035 (0.9) – 1/16 (1.6)
    CWB E550T15-M21A4-Ni1-H4 M21 (75% Ar/25% CO₂) 0.035 (0.9) – 1/16 (1.6)
    TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cu Mn Mo Ni P S Si V
    90% Ar/10% CO₂ 0.03 0.11 1.40 0.15 0.94 0.009 0.010 0.53 0.01
    98% Ar/2% O₂ 0.03 0.05 1.45 0.14 0.95 0.009 0.010 0.50 0.01
    Typical Mechanical Properties
    Shielding Gas Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    -50 °F ft⋅lb (-46 °C J)
    90%Ar / 10%CO2 94 (648) 86 (593) 25 As-Welded – 30 (41)
    98%Ar / 2%O2 99 (683) 83 (572) 25 As-Welded – 35 (47)
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Shielding Gas Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    0.035 (0.9) 75% Ar/25% CO₂ Flat & Horizontal 345 (8.8) 170 25 1/2 – 5/8 (13 – 16)
    0.035 (0.9) 75% Ar/25% CO₂ Flat & Horizontal 425 (10.8) 190 26 1/2 – 5/8 (13 – 16)
    0.035 (0.9) 75% Ar/25% CO₂ Flat & Horizontal 475 (12.1) 210 27.5 5/8 – 3/4 (16 – 19)
    0.035 (0.9) 75% Ar/25% CO₂ Flat & Horizontal 570 (14.5) 225 29 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 260 (6.6) 200 25 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 305 (7.7) 220 26 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 360 (9.1) 240 27.5 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 405 (10.3) 255 29 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 235 (6.0) 215 25 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 315 (8.0) 260 26 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 330 (8.4) 275 27.5 3/4 – 1 (19 – 25)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 345 (8.8) 295 29 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 200 (5.1) 250 25 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 245 (6.2) 290 26 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 275 (7.0) 310 27.5 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 285 (7.2) 330 29 3/4 – 1 (19 – 25)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.