Select 737

Carbon Steel / Flux Cored / Gas Shielded


Features

  • Intended for welding of carbon steels such as ASTM A36, A285, A515-Gr 70, and A516-Gr 70
  • Can be used with both 100% CO₂ and blends of 75-90% Ar/balance CO₂.
  • Well suited for general fabrication of carbon steels abd structural steel welding
  • Tensile strength is slightly lower than most other carbon steel all-position products, providing less overmathcing of strength on carbon steel plate materials.

Standard Diameters

in (mm)
  • 0.045 (1.2)
  • 0.052 (1.3)
  • 1/16 (1.6)

Welding Positions

All Positions

Shielding Gas

  • 75-90%Ar/Balance CO₂
  • 100% CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • AWS A5.20
    • E71T-12C
    • E71T-12M
    • E71T-1C
    • E71T-1M
    • E71T-9C
    • E71T-9M
  • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Mn P S Si
    100% CO₂ 0.04 0.98 0.008 0.010 0.13
    75% Ar/25% CO₂ 0.06 1.46 0.011 0.009 0.24
    90% Ar/10% CO₂ 0.07 1.53 0.009 0.009 0.42
    Typical Mechanical Properties
    Shielding Gas Tensile Strength
    ksi (MPa)
    Yield Strength
    ksi (MPa)
    Elongation
    (%)
    WeldCondition PWHTTemp Charpy V-Notch
    -20 °F ft⋅lb (-29 °C J)
    Charpy V-Notch
    -40 °F ft⋅lb (-40 °C J)
    100%CO2 79 (544) 68 (468) 33 As-Welded 93 (126)
    75%Ar / 25%CO2 84 (582) 70 (483) 30 As-Welded 110 (149) 90 (122)
    90%Ar / 10%CO2 90 (623) 78 (540) 24 As-Welded 88 (119) 74 (100)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.