Select 730

Carbon Steel / Flux Cored / Gas Shielded


Features

  • This product is optimized for superb arc transfer characteristics with 75-80% Ar/Balance CO₂ shielding gas, but may also be used with 100% CO₂, with the transfer mode being small droplets and resembling molten metal spraying onto the weld puddle.
  • All-position weldability, with minimal spatter and excellent bead geometry.
  • Mechanical properties are excellent with either gas, CVN impact values are particularly good at temperatures as low as -20°F.
  • Well suited for structural steel welding, shipbuilding, barge construction, and general plate fabrication.

Standard Diameters

in (mm)
  • 0.045 (1.2)
  • 0.052 (1.3)
  • 1/16 (1.6)

Welding Positions

All Positions

Shielding

  • 75-80% Ar/Balance CO₂
  • 100% CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.20
    • E71T-1C-H8
    • E71T-1M-H8
    • E71T-9M-H8
  • AWS A5.20
    • E71T-1C-H8
    • E71T-1M-H8
    • E71T-9C-H8
    • E71T-9M-H8
  • AWS A5.36
    • E71T1-C1A2-CS1-H8
    • E71T1-M21A2-CS1-H8
  • AWS D1.8
    • 0.045 in (1.2 mm), (100% CO₂)
    • 0.045 in (1.2 mm), (75% Ar/25% CO₂)
    • 0.052 in (1.3 mm), (100% CO₂)
    • 0.052 in (1.3 mm), (75% Ar/25% CO₂)
    • 1/16 in (1.6 mm), (100% CO₂)
    • 1/16 in (1.6 mm), (75% Ar/25% CO₂)
  • Approvals
    Agency Approval Shielding Gas Diameter(s)
    in (mm)
    ABS 3YSA C1 (100% CO₂) 0.045 (1.2) – 1/16 (1.6)
    ABS 3YSA M21 (75% Ar/25% CO₂) 0.045 (1.2) – 1/16 (1.6)
    DNV III YMS (H10) (C1) C1 (100% CO₂) 0.045 (1.2) – 1/16 (1.6)
    DNV III YMS (H10) (M21) M21 (75% Ar/25% CO₂) 0.045 (1.2) – 1/16 (1.6)
    TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cr Cu Mn Mo Ni P S Si V
    100% CO₂ 0.04 0.04 0.04 1.25 0.00 0.02 0.008 0.010 0.63 0.02
    75% Ar/25% CO₂ 0.05 0.04 0.04 1.50 0.00 0.02 0.008 0.009 0.78 0.02
    Typical Mechanical Properties
    Shielding Gas Tensile Strength
    ksi (MPa)
    Yield Strength
    ksi (MPa)
    Elongation
    (%)
    WeldCondition PWHTTemp Charpy V-Notch
    0 °F ft⋅lb (-18 °C J)
    Charpy V-Notch
    -20 °F ft⋅lb (-29 °C J)
    100%CO2 86 (590) 78 (534) 29 As-Welded 108 (146) 89 (121)
    75%Ar / 25%CO2 93 (638) 84 (576) 28 As-Welded 110 (149) 88 (119)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.