Select 70C-6

Carbon Steel / Metal Cored / Gas Shielded

Resources

Features

  • Tubular construction promotes faster travel speeds and better fusion than solid GMAW electrodes
  • High level of deoxidizers enhances welding over hot rolled and rusted plate material
  • Intended for welding carbon steels, such as ASTM A36, A515, A516 and A572
  • Smaller diameters (1/16” or smaller) can be pulse welded in all positions (call in for parameter recommendations)
  • The versatility of a slag free cored wire makes this ideal for general fabrication, structural steel welds, and thin section applications, such as automotive components and hot water heaters

Standard Diameters

in (mm)
  • 0.035 (0.9)
  • 0.045 (1.2)
  • 0.052 (1.3)
  • 1/16 (1.6)
  • 5/64 (2.0)
  • 3/32 (2.4)

Welding Positions

All Positions

Shielding

  • 75-95%Ar/Balance CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.18
    • E70C-6M-H4
  • AWS A5.18
    • E70C-6M-H4
  • AWS A5.36
    • E70T15-M20A2-CS1-H4
    • E70T15-M21A2-CS1-H4
  • AWS D1.8
    • 0.045 in (1.2 mm), (75% Ar/25% CO₂)
    • 0.045 in (1.2 mm), (85% Ar/15% CO₂)
    • 0.045 in (1.2 mm), (90% Ar/10% CO₂)
    • 0.052 in (1.3 mm), (85% Ar/15% CO₂)
    • 0.052 in (1.3 mm), (90% Ar/10% CO₂)
    • 1/16 in (1.6 mm), (85% Ar/15% CO₂)
    • 1/16 in (1.6 mm), (90% Ar/10% CO₂)
    • Approvals
    Agency Approval Shielding Gas Diameter(s)
    in (mm)
    ABS 2YSA M21 (75% Ar/25% CO₂) 0.035 (0.9) – 1/16 (1.6)
    Chrysler W103 M21 (75% Ar/25% CO₂) 0.035 (0.9) – 1/16 (1.6)
    CWB E491T15-C1A3-CS1-H4 C1 (100% CO₂) 0.035 (0.9) – 1/16 (1.6)
    CWB E491T15-M20A3-CS1-H4 M20 (92%Ar / 8%CO₂) 0.035 (0.9) – 1/16 (1.6)
    TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Mn P S Si
    75% Ar/25% CO₂ 0.06 1.55 0.010 0.010 0.66
    85% Ar/15% CO₂ 0.05 1.62 0.012 0.008 0.83
    92%Ar / 8%CO₂ 0.05 1.73 0.010 0.008 0.89
    Typical Mechanical Properties
    Shielding Gas Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    -20 °F ft⋅lb (-29 °C J)
    75%Ar / 25%CO2 87 (601) 79 (544) 25 As-Welded – 46 (62)
    85%Ar / 15%CO2 89 (614) 74 (510) 28 As-Welded – 21 (28)
    92%Ar / 8%CO2 92 (634) 78 (538) 27 As-Welded – 28 (38)
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Shielding Gas Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    0.035 (0.9) 75% Ar/25% CO₂ Flat & Horizontal 345 (8.8) 170 25 1/2 – 5/8 (13 – 16)
    0.035 (0.9) 75% Ar/25% CO₂ Flat & Horizontal 425 (10.8) 190 26 1/2 – 5/8 (13 – 16)
    0.035 (0.9) 75% Ar/25% CO₂ Flat & Horizontal 475 (12.1) 210 27.5 5/8 – 3/4 (16 – 19)
    0.035 (0.9) 75% Ar/25% CO₂ Flat & Horizontal 570 (14.5) 225 29 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 260 (6.6) 200 25 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 305 (7.7) 220 26 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 360 (9.1) 240 27.5 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 405 (10.3) 255 29 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 235 (6.0) 215 25 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 315 (8.0) 260 26 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 330 (8.4) 275 27.5 3/4 – 1 (19 – 25)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 345 (8.8) 295 29 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 200 (5.1) 250 25 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 245 (6.2) 290 26 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 275 (7.0) 310 27.5 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 285 (7.2) 330 29 3/4 – 1 (19 – 25)
    5/64 (2.0) 75% Ar/25% CO₂ Flat & Horizontal 170 (4.3) 350 25 3/4 – 1 (19 – 25)
    5/64 (2.0) 75% Ar/25% CO₂ Flat & Horizontal 185 (4.7) 370 26 3/4 – 1 (19 – 25)
    5/64 (2.0) 75% Ar/25% CO₂ Flat & Horizontal 210 (5.3) 400 28 1 – 1 1/4 (25 – 32)
    5/64 (2.0) 75% Ar/25% CO₂ Flat & Horizontal 255 (6.5) 415 29 1 – 1 1/4 (25 – 32)
    3/32 (2.4) 75% Ar/25% CO₂ Flat & Horizontal 125 (3.2) 370 25 3/4 – 1 (19 – 25)
    3/32 (2.4) 75% Ar/25% CO₂ Flat & Horizontal 140 (3.6) 390 26 3/4 – 1 (19 – 25)
    3/32 (2.4) 75% Ar/25% CO₂ Flat & Horizontal 160 (4.1) 425 28 1 – 1 1/4 (25 – 32)
    3/32 (2.4) 75% Ar/25% CO₂ Flat & Horizontal 185 (4.7) 450 29 1 – 1 1/4 (25 – 32)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.