Select 444Ti

Stainless Steel / Metal Cored / Gas Shielded

Resources

Features

  • Mo addition increases pitting resistance equivalent number (PREN) to decrease susceptibility to damaging corrosion effects.
  • PREN of this alloy compares to that of austenitic alloy 316 stainless steel!
  • Specially formulated to promote a fine-grained ferritic microstructure.
  • Metal cored construction provides better welding performance compared to solid wires.
  • Designed to weld exhaust system components of similar composition, ~18 wt% chromium (Cr), with increased oxidation resistance at high operating temperatures.

Standard Diameters

in (mm)
  • 0.045 (1.2)

Welding Positions

Flat and Horizontal

Shielding

  • Ar + 0.5-5% CO₂
  • Ar + 0.5-3% O₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.22
    • ECG
  • AWS A5.22
    • ECG
    • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cr Cu Mn Mo Ni P PREN S Si Ti
    Argon 0.02 17.60 0.02 0.30 1.90 0.01 0.012 25 0.011 0.68 0.50
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Shielding Gas Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    0.045 (1.2) 98% Ar/2% O₂ Flat & Horizontal 280 (7.1) 200 20 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 98% Ar/2% O₂ Flat & Horizontal 350 (8.9) 220 21 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 98% Ar/2% O₂ Flat & Horizontal 400 (10.2) 250 23 5/8 (16)
    0.045 (1.2) 98% Ar/2% O₂ Flat & Horizontal 475 (12.1) 275 25 5/8 (16)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.