Select 410NiMo

Stainless Steel / Flux Cored / Gas Shielded


Features

  • Modified to contain less Chromium (Cr) and more Nickel (Ni) to eliminate ferrite in the microstructure that improves mechanical properties.
  • Designed for welding in the flat and horizontal positions where flat, well washed beads can be achieved in both 100% CO₂ or 75-80% Ar/balance CO₂ shielding gas
  • Postweld heat treatment more than 1150ºF may result in rehardening due to untampered martensite in the microstructure after cooling to room temperature.
  • Application for this alloy is generally used to weld CA6NM castings or similar materials found in the power generation industry, especially with turbine blades and vanes.

Standard Diameters

in (mm)
  • 0.045 (1.2)
  • 1/16 (1.6)
  • 3/32 (2.4)

Welding Positions

Flat and Horizontal

Shielding Gas

  • 75-80% Ar + Balance CO₂
  • 100% CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.22
    • E410NiMoT0-1
    • E410NiMoT0-4
  • AWS A5.22
    • E410NiMoT0-1
    • E410NiMoT0-4
  • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cr Cu Mn Mo Ni P S Si
    100% CO₂ 0.02 11.90 0.03 0.30 0.49 4.45 0.011 0.007 0.36
    75% Ar/25% CO₂ 0.02 12.10 0.03 0.32 0.52 4.55 0.012 0.007 0.41
    Bismuth is not intentionally added and is not known to be at levels greater than 0.002 wt%

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.