Select 101 SR

Low Alloy / Flux Cored / Gas Shielded

Resources

Features

  • Intended for single and multiple pass welding of quenched and tempered steels that require a postweld stress relief.
  • Excellent high strength properties in the as-welded condition.
  • This electrode is designed for 75-80% argon – balance carbon dioxide; the use of 100 percent carbon dioxide should be avoided.
  • The rutile based fast freezing slag facilitates welding in all positions, with moderate slag volume and easy removal.
  • Select 101-SR is designed to weld oil field components that require a postweld stress relief. However, it is not designed for postweld quench and temper treatments. Select 4130LN should be used if the weldment is to receive postweld quench and temper.
  • Also be used to weld high strength, low alloy steels where 100 ksi minimum tensile strength and excellent toughness are required in the as welded condition.

Standard Diameters

in (mm)
  • 0.045 (1.2)
  • 0.052 (1.3)
  • 1/16 (1.6)

Welding Positions

All Positions

Shielding

  • 75-80%Ar/Balance CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.29
    • E101T1-GM-H4
  • AWS A5.29
    • E101T1-GM-H4
    • Approvals
    Agency Approval Shielding Gas Diameter(s)
    in (mm)
    ABS E101T1-GM M21 (75% Ar/25% CO₂) 0.045 (1.2) – 1/16 (1.6)
    TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Mn Mo Ni P S Si
    75% Ar/25% CO₂ 0.06 1.40 0.35 0.85 0.010 0.007 0.30
    Typical Mechanical Properties
    Shielding Gas Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    -20 °F ft⋅lb (-29 °C J)    		 Charpy V-Notch
    -40 °F ft⋅lb (-40 °C J)
    75%Ar / 25%CO2 108 (745) 99 (683) 21 As-Welded – 41 (56) 33 (45)
    75%Ar / 25%CO2 103 (710) 94 (648) 22 PWHT 1150°F for 1 hr – –
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Shielding Gas Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 200 (5.1) 145 23 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 235 (6.0) 160 24 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 300 (7.6) 185 26 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 375 (9.5) 215 27 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 440 (11.2) 235 29 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ All Positions 170 (4.3) 155 23 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ All Positions 200 (5.1) 175 24 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ All Positions 250 (6.4) 225 26 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 310 (7.9) 250 27 3/4 – 1 (19 – 25)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 395 (10.0) 280 29 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 125 (3.2) 165 23 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 150 (3.8) 195 24 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 185 (4.7) 225 26 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 265 (6.7) 280 27 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 325 (8.3) 320 29 3/4 – 1 (19 – 25)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.