Select 70C-8GT

Carbon Steel / Metal Cored / Gas Shielded

Resources

Features

  • This product is intended for single and limited multiple pass welding of carbon steels, in horizontal fillet and flat position applications.
  • Select 70C-8GT is ideal for those difficult-to-weld items such as heavily rusted and scaled surfaces. It can also be used when the steel is coated with oil or paint. This is due to special deoxidation that makes it very effective when welding over these surfaces.
  • There are several advantages over welding with solid electrodes; increased travel speeds, better fusion into base material and sidewalls, and the virtual elimination of subsurface porosity.
  • Strength levels and CVN toughness make it well suited for welding ordinary and fine grained steels such as ASTM A36, A285, A516, Grade 70 and A515 Grade 70.

Standard Diameters

in (mm)
  • 0.045 (1.2)
  • 1/16 (1.6)
  • 5/64 (2.0)

Welding Positions

Flat and Horizontal

Shielding

  • 75-95% Ar / Balance CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • AWS A5.36
    • E70T15-M20A2-CS1-H4
  • AWS A5.36M
    • E490T15-M20A3-CS1-H4
    • Approvals
    Agency Approval Shielding Gas Diameter(s)
    in (mm)
    CWB E490T15-M20A3-CS1-H4 M20 (90% Ar/10% CO₂) 0.045 (1.2) – 5/64 (2.0)
    TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cr Cu Mn Mo Ni P S Si V
    75% Ar/25% CO₂ 0.04 0.05 0.05 1.62 0.004 0.03 0.010 0.010 0.68 0.007
    Typical Mechanical Properties
    Shielding Gas Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    -20 °F ft⋅lb (-29 °C J)
    75%Ar / 25%CO2 92 (634) 81 (559) 28 As-Welded – 60 (81)
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Shielding Gas Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 260 (6.6) 200 25 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 305 (7.7) 220 26 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 360 (9.1) 240 27.5 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 405 (10.3) 255 29 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 200 (5.1) 250 25 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 245 (6.2) 290 26 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 275 (7.0) 310 27.5 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 285 (7.2) 330 29 3/4 – 1 (19 – 25)
    5/64 (2.0) 75% Ar/25% CO₂ Flat & Horizontal 170 (4.3) 350 25 3/4 – 1 (19 – 25)
    5/64 (2.0) 75% Ar/25% CO₂ Flat & Horizontal 185 (4.7) 370 26 3/4 – 1 (19 – 25)
    5/64 (2.0) 75% Ar/25% CO₂ Flat & Horizontal 210 (5.3) 400 28 1 – 1 1/4 (25 – 32)
    5/64 (2.0) 75% Ar/25% CO₂ Flat & Horizontal 255 (6.5) 415 29 1 – 1 1/4 (25 – 32)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.