Select 4130-S

Low Alloy / Submerged Arc / Flux Shielded

Resources

Features

  • Intended for surfacing and joining of 4130, 4140, 8620, and similar alloy steels.
  • Typical applications include caster rolls, shafts, and mining equipment.
  • The recommended flux is Arcflux BF-10MW. Other neutral fluxes of high basicity can be used as well.
  • This product should not be used for as-welded applications.

Standard Diameters

in (mm)
  • 3/32 (2.4)
  • 1/8 (3.2)

Welding Positions

Flat and Horizontal

Shielding

  • Arcflux BF-10MW

    Polarity

    Direct Current Electrode Positive (DCEP)

    TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Flux C Cr Mn Mo Ni P S Si
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Flux Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 60 (1.5) 250 27.5 1 – 1 1/4 (25 – 32)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 85 (2.2) 350 28 1 – 1 1/4 (25 – 32)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 130 (3.3) 450 29 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 55 (1.4) 350 28.5 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 75 (1.9) 450 29.5 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 100 (2.5) 550 30.5 1 – 1 1/4 (25 – 32)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.