Select 810-B6

Low Alloy / Flux Cored / Gas Shielded

Resources

Features

  • Intended for welding of certain chromium-molybdenum steels where a weld deposit of 5% chromium and 0.5% molybdenum is required.
  • Smooth, stable arc transfer with low spatter emission.
  • Greater tolerance of mill scale and rust.
  • Specially formulated for welding tube, pipe, and plate subjected to high temperature service, such as A213-T5 and A335-P5.

Standard Diameters

in (mm)
  • 0.045 (1.2)
  • 0.052 (1.3)
  • 1/16 (1.6)

Welding Positions

All Positions

Shielding

  • 75-80% Ar/Balance CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • AWS A5.29
    • E81T1-B6M-H8
    • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cr Cu Mn Mo Ni P S Si
    75% Ar/25% CO₂ 0.09 5.31 0.03 0.47 0.56 0.02 0.007 0.013 0.24
    Typical Mechanical Properties
    Shielding Gas Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    70 °F ft⋅lb (21 °C J)
    75%Ar / 25%CO2 93 (641) 75 (515) 21 PWHT 1375°F for 2 hrs 70.5 (96)
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Shielding Gas Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 200 (5.1) 145 22 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 235 (6.0) 160 23 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ All Positions 300 (7.6) 185 25 1/2 – 5/8 (13 – 16)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 375 (9.5) 215 26 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 75% Ar/25% CO₂ Flat & Horizontal 440 (11.2) 235 28 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ All Positions 170 (4.3) 155 22 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ All Positions 200 (5.1) 175 23 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ All Positions 250 (6.4) 225 25 5/8 – 3/4 (16 – 19)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 310 (7.9) 250 26 3/4 – 1 (19 – 25)
    0.052 (1.3) 75% Ar/25% CO₂ Flat & Horizontal 395 (10.0) 280 28 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 125 (3.2) 165 22 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 150 (3.8) 195 23 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ All Positions 185 (4.7) 225 25 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 265 (6.7) 280 26 3/4 – 1 (19 – 25)
    1/16 (1.6) 75% Ar/25% CO₂ Flat & Horizontal 325 (8.3) 320 28 3/4 – 1 (19 – 25)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.