Select EM14KS

Carbon Steel / Submerged Arc / Flux Shielded

Resources

Features

  • Intended for single and multiple pass welding of carbon and certain low alloy steels, and can be substituted anywhere that a solid EM14K electrode is used.
  • Produces a weld deposit chemistry similar to EM14K solid wire electrodes.
  • Higher deposition rates than solid wire when run at the same current level.
  • Exhibits a broader and shallower bead profile than when using solid wire, reducing the tendency for burn through.
  • Capable of running directly over root passes with proper procedure – eliminating requirement for a hot pass.
  • Easy slag removal – reduces post weld cleanup time.
  • Weld-metal deposit chemistry meets the requirements of ASME A1 deposit with Manganese (Mn) of 1.60 Max
  • The recommended flux is ArcFlux BF-10MW.

Standard Diameters

in (mm)
  • 5/64 (2.0)
  • 3/32 (2.4)
  • 1/8 (3.2)
  • 5/32 (4.0)

Welding Positions

Flat and Horizontal

Shielding

  • ARCFLUX BF-1
  • ARCFLUX BF-3.5
  • ARCFLUX 5.1
  • ARCFLUX BF-10MW

    Polarity

    Direct Current Electrode Positive (DCEP)

    Conformances

  • ASME SFA 5.17
    • F7A2-EC1-H8 (ARCFLUX BF-1)
    • F7A6-EC1-H8 (ARCFLUX BF 3.5)
    • F7A8-EC1-H8 (ARCFLUX BF 5.1)
    • F7A8-EC1-H8 (ARCFLUX BF-10 MW)
    • F7P8-EC1-H8 (ARCFLUX BF 5.1)
    • F7P8-EC1-H8 (ARCFLUX BF-10 MW)
  • AWS A5.17
    • F7A2-EC1-H8 (ARCFLUX BF-1)
    • F7A6-EC1-H8 (ARCFLUX BF 3.5)
    • F7A8-EC1-H8 (ARCFLUX BF 5.1)
    • F7A8-EC1-H8 (ARCFLUX BF-10 MW)
    • F7P8-EC1-H8 (ARCFLUX BF 5.1)
    • F7P8-EC1-H8 (ARCFLUX BF-10 MW)
    • Approvals
    Agency Approval Flux Diameter(s)
    in (mm)
    CWB F49A8-EC1-H8 ARCFLUX BF-10 MW 3/32 (2.4) – 5/32 (4.0)
    TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Flux C Cu Mn P S Si Ti
    ARCFLUX BF 3.5 0.07 0.07 1.59 0.014 0.009 0.49 0.05
    ARCFLUX BF 5.1 0.07 0.04 1.57 0.022 0.014 0.64 0.04
    ARCFLUX BF-1 0.07 0.11 1.44 0.020 0.010 0.70 0.03
    ARCFLUX BF-10 MW 0.08 0.03 1.41 0.011 0.009 0.38 0.06
    Typical Mechanical Properties
    Flux Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    -20 °F ft⋅lb (-29 °C J)    		 Charpy V-Notch
    -60 °F ft⋅lb (-51 °C J)    		 Charpy V-Notch
    -80 °F ft⋅lb (-62 °C J)
    ARCFLUX BF 3.5 87 (600) 74 (510) 23 As-Welded – – 42 (57) –
    ARCFLUX BF 5.1 91 (628) 77 (531) 27 As-Welded – – – 33 (45)
    ARCFLUX BF 5.1 85 (586) 67 (462) 30 PWHT 1150°F for 1 hr – – 44 (60)
    ARCFLUX BF-1 85 (586) 72 (497) 23 As-Welded – 25 (34) – –
    ARCFLUX BF-10 MW 86 (593) 73 (503) 24 As-Welded – 76 (103) – 41 (56)
    ARCFLUX BF-10 MW 86 (593) 69 (476) 26 PWHT 1150°F for 1 hr 113 (153) – 73 (99)
    ARCFLUX BF-10 MW 78 (538) 61 (421) 30 PWHT 1150°F for 8 hrs – – 77 (104)
    ARCFLUX BF-10 MW 83 (572) 66 (455) 28 PWHT 1150°F for 20 hrs 105 (142) – 57 (77)
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Flux Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 100 (2.5) 200 27 3/4 – 1 (19 – 25)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 180 (4.6) 300 27.5 3/4 – 1 (19 – 25)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 260 (6.6) 400 28 3/4 – 1 (19 – 25)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 60 (1.5) 250 27.5 1 – 1 1/4 (25 – 32)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 85 (2.2) 350 28 1 – 1 1/4 (25 – 32)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 130 (3.3) 450 29 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 55 (1.4) 350 28.5 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 75 (1.9) 450 29.5 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 100 (2.5) 550 30.5 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 50 (1.3) 450 30 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 65 (1.7) 550 31 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 80 (2.0) 650 32 1 – 1 1/4 (25 – 32)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.