Select 410NiMo

Stainless Steel / Flux Cored / Gas Shielded

Resources

Features

  • Modified to contain less Chromium (Cr) and more Nickel (Ni) to eliminate ferrite in the microstructure that improves mechanical properties.
  • Designed for welding in the flat and horizontal positions where flat, well washed beads can be achieved in both 100% CO₂ or 75-80% Ar/balance CO₂ shielding gas
  • Postweld heat treatment more than 1150ºF may result in rehardening due to untampered martensite in the microstructure after cooling to room temperature.
  • Application for this alloy is generally used to weld CA6NM castings or similar materials found in the power generation industry, especially with turbine blades and vanes.

Standard Diameters

in (mm)
  • 0.045 (1.2)
  • 1/16 (1.6)
  • 3/32 (2.4)

Welding Positions

Flat and Horizontal

Shielding

  • 75-80% Ar + Balance CO₂
  • 100% CO₂
    Flow Rate: 40 – 50 CFM

Polarity

Direct Current Electrode Positive (DCEP)

Conformances

  • ASME SFA 5.22
    • E410NiMoT0-1
    • E410NiMoT0-4
  • AWS A5.22
    • E410NiMoT0-1
    • E410NiMoT0-4
    • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Shielding Gas C Cr Cu Mn Mo Ni P S Si
    100% CO₂ 0.02 11.90 0.03 0.30 0.49 4.45 0.011 0.007 0.36
    75% Ar/25% CO₂ 0.02 12.10 0.03 0.32 0.52 4.55 0.012 0.007 0.41
    Bismuth is not intentionally added and is not known to be at levels greater than 0.002 wt%
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Shielding Gas Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    0.045 (1.2) 100% CO₂ Flat & Horizontal 250 (6.4) 175 24 5/8 (16)
    0.045 (1.2) 100% CO₂ Flat & Horizontal 340 (8.6) 205 27 5/8 – 3/4 (16 – 19)
    0.045 (1.2) 100% CO₂ Flat & Horizontal 440 (11.2) 235 29 5/8 – 3/4 (16 – 19)
    1/16 (1.6) 100% CO₂ Flat & Horizontal 235 (6.0) 245 24 3/4 (19)
    1/16 (1.6) 100% CO₂ Flat & Horizontal 280 (7.1) 275 27 3/4 – 1 (19 – 25)
    1/16 (1.6) 100% CO₂ Flat & Horizontal 325 (8.3) 320 29 3/4 – 1 (19 – 25)
    3/32 (2.4) 100% CO₂ Flat & Horizontal 120 (3.0) 275 25 1 1/4 (32)
    3/32 (2.4) 100% CO₂ Flat & Horizontal 150 (3.8) 335 27 1 1/4 – 1 1/2 (32 – 38)
    3/32 (2.4) 100% CO₂ Flat & Horizontal 165 (4.2) 400 29 1 1/4 – 1 1/2 (32 – 38)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.