Select Ni6S

Low Alloy / Submerged Arc / Flux Shielded

Features

  • Intended for single and multiple pass welding where a minimum strength level of 90 ksi is required coupled with low temperature impact toughness.
  • Higher deposition rates than solid wire when run at the same current level.
  • Exhibits broader and shallower bead profile than when using solid wire, reducing the tendency for burn through.
  • Capable of running directly over root passes with proper procedure – eliminating requirement for a hot pass
  • Easy slag removal – reduces post weld cleanup time
  • Arcflux BF-10MW is the recommended flux, although other neutral fluxes with high basicity can be used in place of this.

Standard Diameters

in (mm)
  • 5/64 (2.0)
  • 3/32 (2.4)
  • 1/8 (3.2)
  • 5/32 (4.0)

Welding Positions

Flat and Horizontal

Shielding

  • ArcFlux BF-5.1
  • ArcFlux BF-10MW

    Polarity

    DCEP

    Conformances

  • AWS A5.23
    • F9A6-ECNi6-Ni6-H4 (ARCFLUX BF 5.1)
    • F9A8-ECNi6-Ni6-H4 (ARCFLUX BF-10 MW)
    • F9P8-ECNi6-Ni6-H4 (ARCFLUX BF-10 MW)
    • TYPICAL WELD DEPOSIT CHEMISTRY (WT%)
    Flux C Cu Mn Mo Ni P S Si
    ARCFLUX BF 5.1 0.09 0.05 1.48 0.16 0.99 0.013 0.010 0.45
    ARCFLUX BF-10 MW 0.11 0.04 1.34 0.15 1.04 0.009 0.007 0.34
    Typical Mechanical Properties
    Flux Tensile Strength
    ksi (MPa)    		 Yield Strength
    ksi (MPa)    		 Elongation
    (%)    		 WeldCondition PWHTTemp Charpy V-Notch
    -40 °F ft⋅lb (-40 °C J)    		 Charpy V-Notch
    -60 °F ft⋅lb (-51 °C J)    		 Charpy V-Notch
    -80 °F ft⋅lb (-62 °C J)
    ARCFLUX BF 5.1 96 (663) 83 (571) 27 As-Welded – 55 (75) 36 (49) –
    ARCFLUX BF-10 MW 95 (652) 81 (561) 27 As-Welded – – – 52 (71)
    ARCFLUX BF-10 MW 94 (651) 82 (563) 28 PWHT 1150°F for 1 hr – – 36 (49)
    Recomended Welding Parameters
    Diameter
    in (mm)    		 Flux Position Wire Feed Speed
    in/min (m/min)    		 Amps Volts Contact Tip to Work Distance
    in (mm)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 100 (2.5) 200 27 3/4 – 1 (19 – 25)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 180 (4.6) 300 27.5 3/4 – 1 (19 – 25)
    5/64 (2.0) ARCFLUX BF-10 MW Flat & Horizontal 260 (6.6) 400 28 3/4 – 1 (19 – 25)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 60 (1.5) 250 27.5 1 – 1 1/4 (25 – 32)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 85 (2.2) 350 28 1 – 1 1/4 (25 – 32)
    3/32 (2.4) ARCFLUX BF-10 MW Flat & Horizontal 130 (3.3) 450 29 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 55 (1.4) 350 28.5 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 75 (1.9) 450 29.5 1 – 1 1/4 (25 – 32)
    1/8 (3.2) ARCFLUX BF-10 MW Flat & Horizontal 100 (2.5) 550 30.5 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 50 (1.3) 450 30 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 65 (1.7) 550 31 1 – 1 1/4 (25 – 32)
    5/32 (4.0) ARCFLUX BF-10 MW Flat & Horizontal 80 (2.0) 650 32 1 – 1 1/4 (25 – 32)

    Packaging (lbs (kg))

    33 (15) Spools, 60 (27.2) Coils, 500 (226.8) Round Drum, 800 (362.9) Hex Drum, 900 (408.2) Hex Drum

    *Some packaging options may not be available depending on diameter and product. Special package options may be available upon request.